Australian Made Logo

Quality Paint at Sensible Prices

"Brinlay's Premium Range of Paints are regularly tested against all leading paint brands to ensure equal or better quality, but cost much less"
Read More

Í

65 Waratah Street
Kirrawee NSW 2232
Ph: 02 9521 8777
Fax: 02 9521 4797

Interior

Interior Paints

Exterior

Exterior Paints

Varnishes

Sealers

Sealers

Trim Colours

Trim Colours

Wood Stains

Wood Stains

Traditional Timber Finishes - Clear Polyurethane

Brinlay Traditional Timber Finishes

Available in flat, satin or gloss and suitable for internal use on furniture, cupboards, doors, windows, railings and skirtings. At least two coats are required to achieve a smooth even sheen finish. A light sanding between coats with fine sandpaper, or dry steel wool gives the best results. Satin and Flat urethane can also be used on brick feature walls or around fireplaces to seal and stop dirt and dust penetration and enhance the brick colour.

Drying Time:
touch dry in 1 hour, recoat in 8 hours.
Clean Up:
Mineral Turps.
Preparation:
Ensure that surface is clean and dry and free of wax, dust and dirt.
Coverage:
approx. 16 square metres per litre.

SAFETY DIRECTIONS

Keep out of reach of children. Avoid skin contact. Provide adequate ventilation. If using indoors, keep doors and windows open while using and during drying. This product is flammable. Do not smoke during application.

FIRST AID

Swallowed:
Do not induce vomiting. Drink plenty of water and contact a doctor or Poisons Information Centre.
Eye:
If in eyes, hold eyes open, flood with water for at least 15 minutes and contact a doctor.
Skin:
If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If irritation occurs, seek medical advice.

This high quality product is manufactured to have minimum environmental and health impact as modern technology allows.