Australian Made Logo

Quality Paint at Sensible Prices

"Brinlay's Premium Range of Paints are regularly tested against all leading paint brands to ensure equal or better quality, but cost much less"
Read More

Í

65 Waratah Street
Kirrawee NSW 2232
Ph: 02 9521 8777
Fax: 02 9521 4797

Interior

Interior Paints

Exterior

Exterior Paints

Varnishes

Sealers

Sealers

Trim Colours

Trim Colours

Wood Stains

Wood Stains

Premium High Gloss Paving Paint

Premium High Gloss Paving Paint

DESCRIPTION

Brinlay High Gloss Paving Enamel is a single pack finish formulated for use in high traffic areas using a blend of oils and urethanes to give outstanding wear properties. A non-slip additive is available for wet areas.

SUITABLE PAINTING SURFACES

For use on interior and exterior wood, concrete or masonry surfaces.

GENERAL DATA

Gloss Selection Guide (when viewing at 60º angle to surface)
Approximately 85 – 100% at 60°

Colour: A full range of colours from an extensive range of white, coloured bases and standard Brinlay Trim Colours.

Application: 2 or 3 coats by roller, brush or spray. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating. In warmer weather, first coat should be thinned with 10 – 20% mineral turps. To achieve better penetration, avoid applying in the heat of the day to hot surfaces. Avoid ponding.

Coverage: Approx. 12 sq. metres per litre.

Thinning: Mineral turpentine in accordance with manufacturer’s instructions.

Drying: Touch dry in 2 – 4 hours. Recoat 12 hours on a day of 25ºC and 50% relative humidity, but will be longer in adverse conditions.

Clean Up: Mineral turpentine.

SURFACE PREPARATION

Ensure all surfaces are cleaned of dirt, dust, powder, grease, oil, smoke stains, cooking residues, polishes and materials detrimental to the finish and adhesion of the new paints by washing with water and detergent or sugar soap (as appropriate), rinse clean any residues.

New and old concrete should be acid washed with no less than 20% solution of Hydrochloric Acid, then pressure-cleaned with water.

HEALTH AND SAFETY

For detailed information, refer to the product label and the current Material Safety Data Sheet available through Brinlay Paints.

Flammability: This product is flammable. Store and use away from sources of heat and ignition.

Toxicity: Lead free. Dry film is non-toxic.

TRANSPORT AND STORAGE

Sizes:
1 litre, 4 litre, 10 litre and 20 litre
Dangerous Goods Class:
3.2
Flashpoint:
26°C
UN:
1263
Packaging Group:
III