Australian Made Logo

Quality Paint at Sensible Prices

"Brinlay's Premium Range of Paints are regularly tested against all leading paint brands to ensure equal or better quality, but cost much less"
Read More

Í

65 Waratah Street
Kirrawee NSW 2232
Ph: 02 9521 8777
Fax: 02 9521 4797

Interior

Interior Paints

Exterior

Exterior Paints

Varnishes

Sealers

Sealers

Trim Colours

Trim Colours

Wood Stains

Wood Stains

Inspirations Semi Gloss Enamel

Inspirations Semi Gloss Enamel

DESCRIPTION

A satin, oil-based paint that dries to a hard, tough, scrubbable finish where constant cleaning is required.

SUITABLE PAINTING SURFACES

An excellent interior finish for woodwork, masonry and wet areas such as bathrooms.

GENERAL DATA

Gloss Selection Guide (when viewing at 60º angle to surface)
Approximately 35 – 45% at 60°

Colour: Can be tinted to a wide range of colours from a white base.

Application: Brush, roller or spray. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating.

Coverage: Approx. 14 – 16 sq. metres per litre.

Thinning: Mineral turpentine in accordance with manufacturer’s instructions.

Drying: Touch dry in 2 – 3 hours. Recoat 24 hours on a day of 25ºC and 50% relative humidity, but will be longer in adverse conditions.

Clean Up: Mineral turpentine.

SURFACE PREPARATION

Previously Painted Surfaces: Sand and scrape all unsound and flaking surfaces. Remove any grease, oil or rust deposits. Fill imperfections with appropriate fill. Sand smooth, sand all gloss and semigloss surfaces to give key. Bare spots to be primed with appropriate Brinlay Wood Primer.
Undercoat with Brinlay Oil Undercoat or Brinlay 100% Acrylic Primer Sealer Undercoat. Finish with 1 – 2 coats of Brinlay Semi Gloss Enamel. Light sand prior to Semi Gloss Enamel coats.

New Interior Timber: Fill imperfections and sand smooth. Apply one coat of Brinlay Wood Primer. Sand lightly to remove raised fibres. Apply 1 – 2 coats of Brinlay Oil Undercoat. Lightly sand, then finish with 1 – 2 coats of Brinlay Semi Gloss Enamel.

New Metal Surfaces: Clean and remove all rust, grease and oil deposits. Apply one coat Brinlay Zinc Phosphate or Galvanised Acrylic Primer for galvanised surfaces. Finish with 2 coats Brinlay Semi Gloss Enamel.

Plasterboard: Apply one coat Brinlay Oil Undercoat or one coat Brinlay 100% Acrylic Primer Sealer Undercoat. Finish with 1 – 2 coats Brinlay Semi Gloss Enamel.

HEALTH AND SAFETY

For detailed information, refer to the product label and the current Material Safety Data Sheet available through Brinlay Paints.

Flammability: This product is flammable. Store and use away from sources of heat and ignition.

Toxicity: Lead free. Dry film is non-toxic.

TRANSPORT AND STORAGE

Sizes:
500ml, 1 litre, 2 litre, 4 litre, 10 litre and 20 litre
Dangerous Goods Class:
3.2
Flashpoint:
26°C
UN:
1263
Packaging Group:
III