Australian Made Logo

Quality Paint at Sensible Prices

"Brinlay's Premium Range of Paints are regularly tested against all leading paint brands to ensure equal or better quality, but cost much less"
Read More

Í

65 Waratah Street
Kirrawee NSW 2232
Ph: 02 9521 8777
Fax: 02 9521 4797

Interior

Interior Paints

Exterior

Exterior Paints

Varnishes

Sealers

Sealers

Trim Colours

Trim Colours

Wood Stains

Wood Stains

Inspirations High Gloss Enamel

Inspirations High Gloss Enamel <

A high gloss complete interior – exterior oil-based gloss enamel. Brinlay High Gloss Enamel is a hard wearing, scratch resistant, durable coating. Available in tinting bases and a complete range of factory tinted colours.

SUITABLE PAINTING SURFACES

All interior and exterior surfaces: doors, architraves, trims, down pipes, gutters, hand rails etc.

GENERAL DATA

Gloss Selection Guide (when viewing at 60º angle to surface)
Approximately 85 – 100% at 60°

Colour: A full range of colours from an extensive range of white and tintable bases.

Application: Brush, roller or spray. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating.

Coverage: Approx. 14 – 16 sq. metres per litre.

Thinning: Mineral turpentine in accordance with manufacturer’s instructions.

Drying: Touch dry in 2 – 3 hours. Recoat 24 hours on a day of 25ºC and 50% relative humidity, but will be longer in adverse conditions.

Clean Up: Mineral turpentine.

SURFACE PREPARATION

Previously Painted Surfaces: Sand and scrape all unsound and flaking surfaces. Remove any grease, oil or rust deposits. Fill imperfections with appropriate fill. Sand smooth, sand all gloss and semigloss surfaces to give key. Bare to be primed with appropriate Brinlay Wood Primer.
Undercoat with Brinlay Oil Undercoat or Brinlay 100% Acrylic Primer Sealer Undercoat. Finish with 1 – 2 coats of Brinlay High Gloss Enamel.

New Interior Timber: Fill imperfections and sand smooth. Apply one coat of Brinlay Oil Undercoat.
Finish with 1 – 2 coats of Brinlay High Gloss Enamel.

New Exterior Timber: As above. When using oil based undercoat, a coat of pink or white primer may be used before undercoating. Finish with 2 coats of Brinlay High Gloss Enamel.

New Metal Surfaces: Clean and remove all rust, grease and oil deposits. Apply one coat Brinlay Zinc Phosphate or Galvanised Acrylic Primer for galvanised surfaces. Finish with 2 coats Brinlay High Gloss Enamel.

Plasterboard: Apply one coat Brinlay Oil Undercoat or one coat Brinlay 100% Acrylic Primer Sealer Undercoat. Finish with 1 – 2 coats Brinlay High Gloss Enamel.

HEALTH AND SAFETY

For detailed information, refer to the product label and the current Material Safety Data Sheet available through Brinlay Paints.

Flammability: This product is flammable. Store and use away from sources of heat and ignition.

Toxicity: Lead free. Dry film is non-toxic.

TRANSPORT AND STORAGE

Sizes:
500ml, 1 litre, 2 litre, 4 litre, 10 litre and 20 litre
Dangerous Goods Class:
3.2
Flashpoint:
26°C
UN:
1263
Packaging Group:
III