Australian Made Logo

Quality Paint at Sensible Prices

"Brinlay's Premium Range of Paints are regularly tested against all leading paint brands to ensure equal or better quality, but cost much less"
Read More

Í

BRINLAY PAINTS
6 Christie Street (PO Box 263)
St Marys NSW 2760
Ph: 02 9623 4022
Fax: 02 8330 5555

 

Interior

Interior Paints

Exterior

Exterior Paints

Varnishes

Sealers

Sealers

Trim Colours

Trim Colours

Wood Stains

Wood Stains

Premium Oil Based Brick & Plasterboard Sealer

Premium Quality Oil Based Brick & Plasterboard Sealer

DESCRIPTION

An acrylic, waterbased sealer suitable for plasterboard and gyprock but not bare unpainted"horsehair or battened" plaster.

SUITABLE PAINTING SURFACES

Can be used for sealing the surface of new plaster , insulation boards and hardboard, concrete surfaces where turps-based top coats are to be used. Apply to surfaces where staining of the finish coats may occur. Ideally suited for use in bathroooms and laundries where constant moisture exists.

GENERAL DATA

Gloss Selection Guide (when viewing at 60º angle to surface)
Approximately 1%

Colour: White.

Application: Brush, roller or spray. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating.

Coverage: Approx. 14 sq. metres per litre. May be as low as 8 sq. metres per litre on cement render.

Thinning: Thin with water if needed.

Drying: Touch dry in 20 to 30 minutes,recoat in 2 hours - Clean up ,washup in warm water - coverage rates remain the same

Clean Up: Warer.

Toxicity: Lead free. Dry film is non-toxic.

Available in 20ltr – 10ltr – 4ltr – 1ltr